CON GRAN PESAR VIVO LA MUERTE DEL AMIGO QUE ME PERMITIÓ CONFIGURAR FÁCILMENTE DURANTE AÑOS MI DISTRIBUCIÓN FAVORITA.
DEJO UNA FOTO PARA AQUELLOS QUE NO VAN A CONOCERLO PERSONALMENTE
dijo:
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="es_ES.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/Argentina/xxxxxxxxxx"
KEYMAP="es"
CONSOLEFONT="Agafari-12"
CONSOLEMAP="UTF-8"
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#
MODULES=(fuse sg forcedeth nfs nfs_acl)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="archlinux"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
#
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
#
DAEMONS=(hwclock dbus syslog-ng wicd !network netfs crond alsa cupsd appset-helper)
Creo estar acertado si digo que este viejo amigo constituyó, junto con AUR y la posibilidad de usar cualquier entorno de escritorio, la trilogía que llevó a Archlinux a ser amada por decenas de millares de usuarios, mucho más que por el rolling release que al final de cuentas en numerosas oportunidades fue más una molestia, causa de la rotura de innumerables sistemas, que un beneficio.
Desde él podía configurar en un abrir y cerrar de ojos idioma, reloj, zona horaria, teclado, fuente, codificación, módulos a cargar y el orden en que hacerlo, red, nombre del host, algunos sistemas de archivos y los daemons. Era el corazón de la configuración, con el rc.conf más un par de archivos, que en todas las distros se encuentran, se resolvía casi todo.
Aquí están sus sucesores según lo que nos dice la WIKI, no voy a dejarles una foto de cada uno porque sería tan engorroso como ellos mismos lo son:
dijo:
Configuration - Configuration file(s)
Hostname = /etc/hostname /etc/hosts
Console fonts and Keymap = /etc/vconsole.conf
Locale = /etc/locale.conf /etc/locale.gen
Timezone = /etc/timezone /etc/localtime
Hardware clock =/etc/adjtime
Kernel modules =/etc/modules-load.d/
Daemons = /etc/rc.conf
Wired Network = /etc/rc.conf
Ya ven, un restito de vida le queda aunque creo que es simplemente porque todavía no saben como resolver el problema de los daemons o porque no quieren copiarle a otras distros.
Hoy que siento, está claro que ésto es pura subjetividad, que la filosofía que nos dio identidad a los archlinuxeros, la filosofía KISS ( HAZLO SIMPLE ESTÚPIDO), está en peligro, solo me queda despedirme.
Este viejo, programador, hacker en su juventud, desarrollador en sus comienzos para la plataforma win32 solo puede decirte:
GRACIAS RC.CONF POR LOS SERVICIOS PRESTADOS. TAL VEZ ALGÚN OTRO TE LLEGUE A EXTRAÑAR TANTO COMO YO