ecuad2r

como hacer: For use with the zune and a standard camcorder cable you will need to swap these: Cable Right (Red Plug) > TV Input Video (Yellow Jack) Cable Video (Yellow Plug) > TV Input Right (Red Plug) Cable Left (White Plug) > TV Input Left (White Plug) That should get you connected. Next I found one of those straight through av cables and cut it in half I then Stripped the wire and prepared the connector I next started to solder it up. Sure its not pretty but it works 4 out of the 3 wires all soldered up All the pins soldered up, still not pretty, but I tried The finished cable. Note the zip tie I used, this is to round the cable for when I can find some heat shrink tube to encase it in. The cable plugged into the tv. Close up of the zune And like magic the same image now on my TV This is an actual video I put on my Zune, 2 points for the one to name it All in all It was a fairly straight foward mod. Sure I could have bought the real cables for god knows how much money. But why bother. Also I have tested this cable on two different zunes, one running the v1.1 firmware and mine running the v1.2 firmware. I know I am new to the forums so if this has been covered a hundred times so be it. I just thought I would share my success. ----------------------------------------------------------------- Si tienen dudas escriban a mi correo [email protected]!